已发表各类期刊论文500余篇，其中SCI收录400余篇，涉及期刊《Progress in Polymer Science》，《Nano Energy》，《Journal of Materials Chemistry A》, 《Macromolecules》,《Chemical Journal》，《Composites Science and Technology》，《ACS Applied Materials & Interfaces》, 《Carbon》, 《Biomacromolecules》等。
2010 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985
Zhang X, Zhao T, Pi H, Guo S. Mechanochemical Preparation of a Novel Polymeric Photostabilizer for Poly(vinyl chloride). Journal of Applied Polymer Science. 2010;116(5):3079-3086.
Ye X, Pi H, Guo S. A Novel Route for Preparation of PVC Sheets with High UV Irradiation Resistance. Journal of Applied Polymer Science. 2010;117(5):2899-2906.
Yan B, Wu H, Jiang G, Guo S, Huang J. Interfacial Crystalline Structures in Injection Over-Molded Polypropylene and Bond Strength. Acs Applied Materials & Interfaces. 2010;2(11):3023-3036.
Xie T, Wu H, Bao W, Guo S, Chen Y, Huang H, et al. Enhanced Compatibility of PA6/POE Blends by POE-g-MAH Prepared Through Ultrasound-Assisted Extrusion. Journal of Applied Polymer Science. 2010;118(3):1846-1852.
Wu H, Bao W, Guo S. Enhanced Flow Behaviors of Metallocene-Catalyzed Linear Low-Density Polyethylene During Ultrasound-Assisted Extrusion. Polymer Engineering and Science. 2010;50(11):2229-2235.
Pi H, Chen S, Guo S. MICROSTRUCTURE AND PROPERTIES DEVELOPMENT OF THERMALLY STABILIZED PVC DURING PHOTOAGEING. Acta Polymerica Sinica. 2010(6):660-665.
Lin C, Wang S, Sun H, Li J, Guo S. Real-Time Ultrasonic Characterization of the Chain Orientation of High Density Polyethylene Melts during Processing. Polymer Engineering and Science. 2010;50(6):1140-1150.
Lin C, Sun H, Wang S, Huang J, Li J, Guo S. In-Process Ultrasonic Measurements of Orientation and Disorientation Relaxation of High-Density Polyethylene/Polyamide-6 Composites with Compatibilizer. Journal of Applied Polymer Science. 2010;116(1):320-327.
Jiang G, Wu H, Yan B, Guo S. Effect of a Tie Film on the Enhanced Interfacial Adhesion Between Polyethylene and Polyamide-6 in a Sequential Injection Molding. Polymer Engineering and Science. 2010;50(4):719-729.
